thiNcoder® EZI 2.0 - Technical Specifications
Overview | Technical Specifications
| Mechanical |
| Cover diameter |
0.875"/22.2mm |
| Cover height |
0.138"/3.5mm |
| Shaft diameter |
0.236"/6mm |
| Shaft type |
Round with flat |
| Shaft length |
0.285"/7.24mm |
| Length of flat |
0.270"/6.8mm |
| Dimension from shaft back to flat |
0.178"/4.5mm |
| Rotational life |
>100,000 cycles |
| Contacts |
Ball armature |
| Shear force of shaft |
12 lbs./50 N |
| Detents |
| Number of detents |
0, 1, 16(22.5°), 24(15°) Stock Custom available |
| Detent |
Ball and spring |
| Stop plate positions |
300° sweep standard custom available |
| Stop strength |
3.0 in. lb./35Nm Nominal |
| Rotational torque |
2.5 in. oz./17mNm Nominal |
Top of page
| Material |
| Rotor / shaft / detent / ring |
Engineering thermoplastic |
| Cover |
Plated brass alloy |
| Magnet material |
Rare earth |
| Circuit |
Polyester flex |
| Ball armature |
Gold plated stainless steel |
| Electrical (switch type and codes) |
| Quadrature (repeating 2-bit grey code) |
8 (16 detent), 12 (24 detent)
Pulses/360° |
| Binary (repeating 2-bit code) |
8 (16 detent), 12 (24 detent)
Pulses/360° |
| On/Off switch |
Available |
| Analog potentiometer |
Available |
| Analog potentiometer resistance |
1K-10K ohm, 300° sweep |
| Voltage |
3 to 30 VDC |
| Curent |
10mA |
| Power |
100mW maximum |
| Electrical Life |
>100,000 Cycles |
| Maximum contact resistance |
<500 ohms at end of life |
| Open circuit and insulation resistance |
>20 Meg ohms (between mutually insulated parts) |
| Voltage breakdown |
250 VAC (peak to peak, between mutually insulated parts) |
| Environment |
| Storage |
-40°C to 85°C |
| Operating temperature |
-40°C to 85°C |
| Thermal shock |
-40°C to 85°C |
| Humidity resistance |
95% RH |
| Salt fog, 5% solution |
24 hours |
| Shock |
100g |
| Drop |
8 feet |
» Download ThiNcoder EZI 2.0 pdf spec sheet
Top of page
Overview | Technical Specifications